| |
|
 |
HORIZONTAL
DIRECTIONAL DRILLING RIG |
|
| 320
TONS PULL BACK |
| -------------------------------------------------------------------------------------------- |
| DRILL RIG |
| Manufactured By: |
American Augers
|
| Capacity |
1100 H.P. Caterpillar |
| |
170,000 lbs Push |
| |
680,000 lbs Pull |
| |
80,000 ft-lbs Rotary |
| |
90 rpm max |
| |
10° ~ 18° adjustable |
| Wrench/Clamp: |
5" - 10-3/4" |
| Max Breakout Torque |
120,000 ft-lb |
| Current Location |
In Transit |
| Ownership
|
Trenchless Engineering |
|
| |
| OPERATIONAL CONTROL ROOM |
| Cabin Size: |
7 ft. 9 in. X 10 ft. 10 in. X 8 ft. 6 in. |
| |
Air Conditioned |
| Approx. Shipping Weight: |
6,000 lb (2,725 kg). |
|
| MUD PUMP |
| Manufactured By: |
OPI Inc
|
| Capacity |
750 HP - Caterpillar 3412 |
| |
600 GPM, 5000 psi Max. |
| |
Triplex Mud Pump |
| |
Pneumatic Transmission |
|
| |
| GENERATOR |
| Manufactured By: |
Kirloskar Brothers
|
| Capacity |
250 KVA |
|
| |
| MUD TANK |
| Manufactured By: |
Tri Flow
|
| Capacity |
2 x 4,000 Gallons each |
| Pump |
2, 6x5 Centrifugal Pumps, powered |
| |
By 3 nos. 50 HP Electric Motors |
| Bentonite Mixer |
300 GPM Venturi System |
|
| |
| SOLID CONTROL UNIT |
| Manufactured By: |
Tri Flow
|
| Capacity |
2 x 400 U.S. gallons per minute (1,512 lit/min). |
| Circulating Pump |
4x6 vertical centrifugal, electric driven |
| Desitling |
Five inch cones (8 units) with manifolds and valves |
| Mud Agitation |
8 jets (2 swivel, 6 fixed) |
| Cleaning |
Two linear motion shakers, two screens each, driven by |
| Cleaning |
electric motors. Fold-down discharge chutes for cuttings. |
| Trash Pump |
Six Inch electric driven with 100 ft (30.5 m) of discharge hose. |
|
| |
| IN-HOLE TOOLING |
| Drill Pipe |
5-1/2" O.D., S-135
220 joints |
| Drill Motor |
6-1/2" OD, 300-500 GPM, 5500 NM
Torque |
| Barrel Reamers |
12", 16", 18", 24", 28", 36", 45" |
| Non Magnetic Drill Collars |
6-1/2" |
| Drill Bits |
8-1/2" |
|
| |
| GUIDANCE SYSTEM |
| Survey Probe |
Tensor Inc with TruTracker Guidance capability
|
| Manufactured |
2003 |
| Total Stations |
NIKON 410 DTM
Capable of measuring 3.5 km with one sec accuracy |
|
| |
| SUPPORT EQUIPMENT |
| Welding Machine |
400 Amps DC Arc Welder, Qty 2 |
| Hydro Testing Pressure Pump |
280 Bar, 480 LPH |
| Sump Pump |
6", 12 HP Submersible Pump |
| Dead Weight Tester |
400 bar, LC 0.001 kg |
| Holiday Detector |
30 KVA |
| Pipe rollers (up to 30 inch pipe diameter) |
80 Pcs. |
| Pipe rollers (up to 18 inch pipe diameter) |
15 Pcs. |
|
| |
| TOOLING |
| Container Containing spares for Rig spread, Tooling, Vices, Angle Grinders, Chain Pulley Blocks, Winch, cross over subs, dies etc. |
|
| OTHER EQUIPMENT |
| Other
equipment is rented out form local suppliers
as and when required. |
|
| |
|
|
